MultiCut™ Reflective Nylon Heat Transfer Vinyl 20"

MultiCut Reflective Nylon is a type of vinyl material that can be used to create designs or lettering on various fabrics or textiles through a heat transfer process. It is specially designed to reflect light and increase visibility in low-light conditions, making it ideal for use on safety gear, athletic wear, and other types of clothing that require high visibility. 

When used under normal conditions, this product does not generate or release any dangerous substances or hazardous chemicals. This is a non-hazardous product in accordance with the current GefStoffV and EU criteria. Therefore it is not necessary to prepare a Material Safety Data Sheet for this product. The Safety Data Sheet serves only to comply with the regulation to supply information in accordance with REACH Regulation (EC) No. 1907/2006 and is available on request. This product is not a hazardous product with regards to transportation legislation; neither does it contain substances that are hazardous to water within the meaning of the federal water act. After use, dispose of the waste product in accordance with the local / national authorities.

Reflective Nylon is a transfer film based on a fabric with retro-reflective properties. Due to a special heat-sealing adhesive Reflective Nylon is suitable for the transfer onto Nylon and textiles with hydrophobic impregnation.

The film consists of metalized microscopic glass beads laminated to a dry heat-reactivating adhesive backing. A transparent, self-adhesive PET liner on the reflective side guarantees that the film can be cut with all current plotters. We recommend using a standard 45° knife. Due to the fabric backing, it is possible to cut letterings with a minimum line width of 3 mm. After weeding the cut flex film is transferred for 3 - 4 sec. by heat press. The PET liner should be removed lukewarm. After cooling down, the material is to be pressed for another 10 - 15 sec. with the same parameters.

Reflective Nylon is composed of wide-angle, exposed, retro-reflective lenses. The photometric values (min. retro-reflection values) conform to EN 471 (class 2).

• Width: 20"
• Length: 1, 3, 6, 9 or 27 yards